Basic Fundamental Quantities
A Fundamental Quantity
Define a fundamental quantity
Physical quantity:Is any character which can be measured by an instrument.
A Unitis the standard which is used to explain measurement of a body.Eg; kilogram, metre, second etc.
Fundamental quantitiesare numbers that we need to describe the world around us, which we cannot express in terms of “simpler,” more basicquantities. Here is an example: My weight is not afundamental quantity, because it depends on how much stuff makes up my body.
Three Basic Fundamental Quantities of Measurement
Mention three basic fundamental quantities of measurement
Basic fundamental quantitiesare physical quantities from which other physical quantities are derived from. This includes three quantities namely mass, length and time.
The S.I Unit of Fundamental Quantity
State the S.I unit of fundamental quantities
SI unit (International
system of units): Is the system of units which is used internationally
to measure three basic physical quantities.
system of units): Is the system of units which is used internationally
to measure three basic physical quantities.
SI units of fundamental quantities
| Basic physical quantity | SI unit |
| Mass | Kilogram (kg) |
| Length | Meter (m) |
| Time | Second(s |
Metric system
Is
an international system which is a decimal based system, consequently,
conversions from one unit to another within the metric system can
accomplished by multiplying or dividing by ten or power of ten.
an international system which is a decimal based system, consequently,
conversions from one unit to another within the metric system can
accomplished by multiplying or dividing by ten or power of ten.
Note:
With the exception of temperature, amount of substance and luminous
intensity international other units of measurement that are smaller or
larger than the most commonly used units are expressed by attaching a
prefix to the most commonly used units.
With the exception of temperature, amount of substance and luminous
intensity international other units of measurement that are smaller or
larger than the most commonly used units are expressed by attaching a
prefix to the most commonly used units.
More than 1 unit
- Giga(G) = 1,000,000,000 (10ˆ9)
- Mega(M) = 1,000,000 (10ˆ6)
- Kilo(K) = 1,000(10ˆ3)
- Hector (h) = 100(10ˆ2)
- Decca(da) = 10(10ˆ1)1
Less than 1 unit
- Deci (d) = 1/10 (10ˆ-1)
- Cent (c) = 1/100(10ˆ-2)
- Mill (m) = 1/1000 (10ˆ-3)
- Micro(μ) = 1/1,000,000(10ˆ-6)
Appropriate Instruments for Measuring Fundamental Quantities
Use appropriate instruments for measuring fundamental quantities
Length, l
Length is the distance between two points, objects or space.The SI unit of length is meter(m). Other commonly used units are kilometer(km) and centimeter(cm).
1km = 1000m
1m = 100cm
The instrument used to measure length is the metre rule.
How to read the metre rule:Owing
to the thickness of the wood,the eye must always be placed vertically
above the mark being read, in order to avoid errors due to parallax.
to the thickness of the wood,the eye must always be placed vertically
above the mark being read, in order to avoid errors due to parallax.
Measuring of length (diameter) of small objects.
The diameter of small objects is measured by using two instruments:
- Vernier caliper
- Micrometer screw gauge
A venier caliper is the instrument used to measure length to the accuracy of 0.01cm.It is used to measure lengths to the range of 1.0cm to about 12.0cm.The figure below describe the structure of vernier caliper.
The
main scale is graduated in centimeter (cm) while the vernier scale is
graduated in millimeter (mm).The vernier scale is a short scale 9mm long
divided into 10 equal parts, so that the difference in length between a
vernier division and the main scale division is 0.1mm or 0.01cm.
main scale is graduated in centimeter (cm) while the vernier scale is
graduated in millimeter (mm).The vernier scale is a short scale 9mm long
divided into 10 equal parts, so that the difference in length between a
vernier division and the main scale division is 0.1mm or 0.01cm.
The
inside jaws are used to measure the inside diameter while the outside
jaws are used to measure outside diameter.The vernier slides over the
main scale.
inside jaws are used to measure the inside diameter while the outside
jaws are used to measure outside diameter.The vernier slides over the
main scale.
How to read
- The main scale reading is recorded. This is the reading which precedes the zero mark of the vernier scale.
- The
vernier scale reading is recorded by reading the mark on it which
coincide with a mark on the main scale (i.e. vernier scale reading x
0.01cm). - The summation of these two readings is the length of the object measured.
A micrometer screw gauge:Is an instrument used to measure length to the accuracy of 0.001cm(0.01mm).It
is used to measure the diameters of wires and ball bearings. It can
measure small lengths up to about 2.5cm.The diagram below describes the
micrometer screw gauge.
is used to measure the diameters of wires and ball bearings. It can
measure small lengths up to about 2.5cm.The diagram below describes the
micrometer screw gauge.
It
consists of a spindle which is fitted with a graduated thimble. The
screwed portion of a spindle is totally enclosed to protect it from
damage.The pitch of the screw is 0.5mm, so that the spindle moves
through o.o5cm for each complete turn.
consists of a spindle which is fitted with a graduated thimble. The
screwed portion of a spindle is totally enclosed to protect it from
damage.The pitch of the screw is 0.5mm, so that the spindle moves
through o.o5cm for each complete turn.
The
anvil and the spindle grip the measured object between them. The
ratchet prevents the user from using undue pressure. The sleeve is
graduated in mm, each graduation represent one complete turn of the
screw.
anvil and the spindle grip the measured object between them. The
ratchet prevents the user from using undue pressure. The sleeve is
graduated in mm, each graduation represent one complete turn of the
screw.
How to read a micrometer screw gauge:
- Sleeve reading is recorded. This gives the units and the first two decimal places in mm.
- Thimble reading is then recorded. This gives the third decimal place (thimble reading x 0.001mm).
- The summation of these two readings gives the diameter of the object under measurement.
Precautions when using a micrometer screw gauge.
- Before use,the faces of anvil and spindle should be wiped clean to remove any dirty particle which would give false readings.
- Check and record for zero error then + or –the correction to the final answer.
Mass
Mass of a body is the amount of matter it contains. The SI unit of mass is kilogram(kg). Other commonly used units are gram(g) and tones(t).
1kg = 1000g
1t = 1000kg
The mass of a body doesn’t change from place to place. The instrument used to measure mass is called abeam balance.
Difference between mass and weight:
| Mass | Weight |
| Is the amount of matter contained | Is the force by which the earth pull a body to its centre |
| SI unit is kilogram | SI unit is Newton |
| Doesn’t vary from place to place on the earth’s surface | Varies from place to place on the earth’s surface |
| Measured by beam balance | Measured by a spring balance |
Time
Is the gap between two occasions or events.The SI unit of time second(s). Other units used are minutes (min), hour(h),day etc.
1min = 60s
1h = 3600s
1day = 86400s
The instruments for measuring time are clocks and watches.
Basic Apparatus/equipment’s and their uses
Basic Apparatus/Equipments Used for Measurement
Describe basic apparatus/equipments used for measurement
Volume
Volume
is the amount of space occupied by a substance. The SI unit is cubic
meter (mˆ3).Other units used are cubic centimetre (cmˆ3) and litre(l).
is the amount of space occupied by a substance. The SI unit is cubic
meter (mˆ3).Other units used are cubic centimetre (cmˆ3) and litre(l).
Instruments used to measure the volume of liquids:
Measuring cylinder-used for measuring or pouring out various liquids.
Measuring flask and pipette are used for getting fixed pre-determined volume.
Flask
Pipette
Burette-used to deliver any required volume up to its total capacity.
How to read volume measuring instruments(precautions).
Readings
are always taken at the level of the bottom of the meniscus or curved
surface of the liquid. Mercury is an exception as its meniscus curves
downwards.
are always taken at the level of the bottom of the meniscus or curved
surface of the liquid. Mercury is an exception as its meniscus curves
downwards.
Care
should be taken to place the eye correctly to avoid parallax errors.
When taking readings, the pipette and burette must be upright and the
cylinder and flask must stand on a horizontal bench otherwise errors may
arise from tilting.
should be taken to place the eye correctly to avoid parallax errors.
When taking readings, the pipette and burette must be upright and the
cylinder and flask must stand on a horizontal bench otherwise errors may
arise from tilting.
Measuring volume of irregular objects.
The
volume of an irregular solid can be determined by measuring the volume
of water displaced in a measuring cylinder directly or with the aid of
an overflow eureka can.
volume of an irregular solid can be determined by measuring the volume
of water displaced in a measuring cylinder directly or with the aid of
an overflow eureka can.
Activity 1
Experiment
Aim: To measure the volume of an irregular object.
Methods
By using a measuring cylinder directly
Materials and apparatus: Irregular object eg; stone, thread, measuring cylinder, eureka can and water.
Procedures
- Poor a known volume of water in a burette(V1)
- Tie a stone with a thread.
- Immerse the tied stone in water holding the thread and record the volume (V2)
- Make sure the stone is totally immersed in water.
Results
- Volume before introducing solid = V1
- Volume after introducing solid = V2
- Volume of irregular solid(V3) = V2 – V1
By using the eureka can
Procedureto follow:
- Poor water into eureka can up to its spout
- Immerse a well tied stone in water completely
- Collect the overflowed water in the water.
- Use a measuring cylinder to determine the volume of water collected
Observation
- When a stone was introduced in an overflow can, water overflowed to the measuring cylinder.
- The volume of water collected is equal to the volume of irregular object(stone)
Sources of Errors in Measurement
Identify sources of errors in measurement
Error
is the difference between the measured value and the real or actual
value (The difference in reading is known as the error).
is the difference between the measured value and the real or actual
value (The difference in reading is known as the error).
There are two types of errors, namely:
- Systematic errors
- Random errors
Systematic errors
Systematic
errors results in the measurement or reading being consistently over
the actual value OR consistently smaller than the actual value.
errors results in the measurement or reading being consistently over
the actual value OR consistently smaller than the actual value.
Sources of systematic errors.
- Zero error:
Zero Error is caused if the reading shown is Not zero when the true
value is actually zero. This is most probably caused by a flaw in the
instrument for example when using a ruler that has lost its zero scale
due to wear and tear hence causing an error in the measurement of
length. - Wrong assumptions: For example if you
assume that water boils at 100 degree Celsius but actually its boiling
point is higher if there are impurities in it. (Pure water boils at 100
degree Celsius). - Lag of reaction time: For
example in a sports day, when measuring a 100 m running time using a
stopwatch. The observer may not press the stop button exactly when the
foot of the runner touches the finishing line. - Calibration errors:
Instruments that are not properly calibrated could also cause error and
this has to be put in consideration when writing a report or when there
is an anomaly in reading.
Random errors.
Random
error is caused by the observer who reads the measuring instrument.
Just like the systematic error, there is also positive or negative
error. Positive error is when the reading is bigger than the real value
and negative error is when the reading is smaller than the real value.
error is caused by the observer who reads the measuring instrument.
Just like the systematic error, there is also positive or negative
error. Positive error is when the reading is bigger than the real value
and negative error is when the reading is smaller than the real value.
Ways of reducing errors
- Taking several readings and then find the average.
- Avoiding
parallax error by positioning the instrument (meter rule) properly on
the table with the eyes perpendicular to the scale. - Some
instruments can be adjusted to eliminate zero error. For example when
using an ammeter, there is an adjuster to set the indicator to zero
before making any measurement. - In the case of a ruler,
measurement can be carried out starting from the next clear scale for
example if scale 0.0cm is blurred, we can start measuring the length
from 2.0cm, of course taking the difference of value in consideration
when recording the final reading.
The Concept of Density of a Substance and its S.I Unit
Explain the concept of density of a substance and its S.I unit
The Density of a substance is its mass per unit volume.
The
unit of density is kg/mˆ3. Other unit used is g/cmˆ3.Density of regular
solid object can easily be found by direct and easy measurements.-It
involves measuring the mass and calculating the volume as described in
the experiment below.
unit of density is kg/mˆ3. Other unit used is g/cmˆ3.Density of regular
solid object can easily be found by direct and easy measurements.-It
involves measuring the mass and calculating the volume as described in
the experiment below.
The Density of Regular and Irregular Solids
Determine the density of regular and irregular solids
Activity 2
Experiment
Aim;To measure the density of rectangular block.
Material and Apparatus :Ruler, beam balance and rectangular block.
Procedures:Using a beam balance measure mass of the block, m.Measure its length, width and height.
Results
- The mass of the rectangular block is m.
- The volume of the rectangular block will be calculated by multiplying the obtained length, l height, h and width, w.
- Volume, V = l x h x w, But; Density = mass/volume
- The volume of a material can be obtained by using various methods depending on the shape of the material
Activity 3
Experiment.
Aim; To determine density of irregular solid.
Materials and apparatus:Irregular solid like stone, measuring cylinder, beam balance and water.
Procedures
- Obtain the mass of the given object using the beam balance.
- Fill water to the measuring cylinder to the volume V₁.
- Immerse the well tied irregular object totally in the cylinder containing water.
- Record the new volume V₂.
Results
- Volume of irregular object = V₂ – V₁
- Mass obtained = M
The Density of a Liquid
Determine the density of a liquid
Density of liquids can be determined by using a burrete or a density.
Activity 4
Experiment.
Aim: To determine density of liquids using a burette.
Materials and apparatus: Burette, beaker, beam balance and kerosene.
Procedures
- Record the mass of the empty beaker m₁ using a beam balance.
- Pour the known volume of kerosene into the beaker by using bur rete, V.
- Record the mass of the beaker and kerosene m₂.
Results
Definition of the Relative Density of a Substance
Define the relative density of a substance
The Relative density
of a substance is the ratio of its density to the density of water.The
density of water has the density of approximately 1.0g/cm³ or 1000kg/m³.
of a substance is the ratio of its density to the density of water.The
density of water has the density of approximately 1.0g/cm³ or 1000kg/m³.
Note:Since
the density of pure water is 1g/cm³, the RD of a substance will be
represented by the same number as its density in g/cm³.RD has no units as its ratio of same quantities.
the density of pure water is 1g/cm³, the RD of a substance will be
represented by the same number as its density in g/cm³.RD has no units as its ratio of same quantities.
Applications of Density and Relative Density in Real Life
Interpret applications of density and relative density in real life
Application of RD in real life.
- It is the key factor which is considered during the design of various structures and equipment. Eg. ships and planes.
- Density is considered during the selection of materials.
- Density is also considered during the design of equipment used in swimming.
